Identification And Servicing; Technical Specifications - Grillo G84 Manuel D'emploi Et D'entretien

AFTER-SALES SERVICE
This handbook provides instructions for use of the cultivator and for correct basic servicing which
the user can carry out himself. For all procedures not described in this handbook, contact your
local dealer.
SPARE PARTS
Always use original spare parts, as they are the only ones to offer complete safety and
interchangeability. Always state the serial number when ordering. For engine parts, refer to the
specific handbook.
GUARANTEE
The guarantee is given in compliance with the current law. The dealer will have to give the client a
copy of the registration card of the machine, which they will print up from the Grillo website.
For the engine the guarantee of the relative manufacturers apply.
ORDERING SPARE PARTS
Always state the machine serial number and the code number of the part to be replaced.
Contact your local dealer. Our address is:
GRILLO S.p.A.
Via Cervese 1701 - 47521 CESENA (FC) - ITALY
Tel. 0039 / 0547 / 633111 - Fax 0039 / 0547 / 632011
Web site: www.grillospa.it - E-mail:
ENGINES
- LONCIN GR200, 196 cc 5,5HP @ 3600 r.p.m., one-cylinder petrol
- KOHLER 3000, 196 cc 5,5HP @ 3600 r.p.m., one-cylinder petrol
- HONDA GX200, 196 cc 5,5HP @ 3600 r.p.m., one-cylinder petrol
- HONDA GX270, 270 cc 8,4HP @ 3600 r.p.m., one-cylinder petrol
- LONCIN D350FD, 394 cc 6,5HP @ 3600 r.p.m., one-cylinder diesel
- LONCIN D440FD, 441 cc 9,1HP @ 3600 r.p.m., one-cylinder diesel
MACHINE
Clutch: active conic clutc
Gearbox: 4 forward + 2 reverse gears both in walking tractor version as well as in sickle bar
version (by turning the handlebar)
Speed with engine at 3600 r.p.m:
1 st
2 nd
1 st REVERSE
nd
2 REVERSE
P.T.O.: 965 revolutions independent from gearbox r.p.m. with clockwise rotation (walking tractor
version) and anticlockwise rotation (sickle bar version).
Translation of the Original Instructions

IDENTIFICATION AND SERVICING

grillo@grillospa.it

TECHNICAL SPECIFICATIONS

GEAR
IDENTIFICATION
The vehicle's serial number is punched on the
nameplate on the left-hand longitudinal member
of the chassis and on the gearbox nameplate.
Always state the serial number when ordering
spare parts.
SPEED WITH 4.00-8 TYRES
1,1
2,6
1,1
2,6
7