Self-Monitoring Functions Overview; Errors During Data Input; Code Error; No Contact - Hürner HST 300 Smart Manuel Utilisateur

Masquer les pouces

Table des Matières

Les langues disponibles

H Ü R N E R S c h w e i s s t e c h n i k G m b H

Nieder-Ohmener Str. 26

35325 Mücke, Germany

firmed before every new welding, "off" that the user

is not prompted to enter it.

"Joint Number on" means that the unit assigns an auto-

matically incremented joint number to every welding

operation belonging to a commission already known,

and displays this number on the screen next to the

report number, "off" that no joint numbers will be

assigned at all.

"Additional Data on" means that the additional data will

have to be entered or confirmed before every new

welding, "off" that the user is not prompted to enter

them.

"Fitting Code on" means that the second, so-called trace-

ability code of the electrofusion fitting has to be

entered before every welding, "off," that this is not

possible.

"Pipe Codes on" means that the codes of both pipes/

components (ISO-compliant welding and treaceability

codes) have to be entered before every welding, "off,"

that this is not possible.

"Pipe Length on" means that the length of both pipes/

components has to be entered before every welding,

"off," that this is not possible.

"Weather Conditions on" means that the weather has to

be selected in a list before every welding, "off," that

this is not possible.

"Installing Company on" means that the company that

performs the installation work has to be entered before

every welding, "off," that this is not possible.

"Print Tags – M – " means that by pressing the MENU key,

the user can access a sub-menu for starting to print (a)

label(s) with reference to a given welding operation,

with the optional label tag printer.

All data can also be read from a bar code with the

scanner, provided such a bar code is available.

Info