Selecting The Display Language; Setting The Clock; Selecting The Temperature Unit; Understanding The "Recording" Sub-Menu - Hürner HST 300 Smart Manuel Utilisateur

"Language – M – " means that by pressing the MENU key,
the user can access a sub-menu for selecting the display
and report language (see Sect. 10.1.1).
"Date/Time – M – " means that by pressing the MENU key,
the user can access a sub-menu for setting the clock
(see Sect. 10.1.2).
"Temperature Unit – M – " means that by pressing the
MENU key, the user can access a sub-menu for select-
ing centigrade or Fahrenheit as the unit for the tem-
perature.
"Inventory Number – M – " means that by pressing the
MENU key, the user can access a sub-menu for entering
the number under which the unit is inventorized with
the operating company.
"Number of Tags – M – " means that by pressing the
MENU key, the user can access a sub-menu for entering
the number of tags that are printed automatically after
welding with the optional label tag printer if such a
printer is connected.

10.1.1 Selecting the Display Language

When the "Select Language" sub-menu was selected, the
screen changes and the display reproduced in Display 14
appears.
Use the arrow keys ñ and ò to select one of the options,
"Deutsch," "English," "Français," etc. and confirm by press-
ing the START/SET key.

10.1.2 Setting the Clock

When the "Set Clock" sub-menu was selected, the screen
changes and the display reproduced in Display 15 appears.
The time of day and the date can be set using the keypad.
The portions "Hour," "Minute," "Day," "Month," and
"Year" are set separately. Press the START/SET key to con-
firm your settings.

10.1.3 Selecting the Temperature Unit

The unit of temperature values (Centigrade or Fahrenheit) can
be selected in a sub-menu similar to the language selection (see
Sect. 10.1.1).

10.2 Understanding the "Recording" Sub-menu

"Welder Code on" means that the welder identification
code has to be entered as set with "Welder Code Op-
tions," "off," that this is impossible.
"Commission Number on" means that the commission
number (job number) will have to be entered or con-
18
EN
HÜRNER HST 300 Smart User's Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
>Deutsch
English
Date/Time
21.06.13
Welder Code
>Commission No.
Display 14
14:28
Display 15
on
on
Display 17
Version July 2018