Operation; General; Start Up - Arjohuntleigh Flowtron ACS900 Notice D'utilisation

4. Operation

General

Start Up

Mains Power Connected
Major Revision
These instructions cover the routine operation of the
system. Other operations, such as maintenance and
repair, should only be carried out by suitably qualified
personnel.
Refer to "Controls, Alarms and Indicators" on page 6 for
a description of the controls, indicators and LCD screen.

If the operation or performance of the pump
changes during use, refer to "Troubleshooting" on
page 21 of this IFU before calling a service
engineer or contacting your local ArjoHuntleigh
sales office.
1. To switch on the pump, do one of the following:
• Connect the pump to the mains power supply
using the power cable provided.
• If operating on battery (the pump is disconnected
from the mains power supply), press the Power
button.
2. The pump will power up automatically and start
running a diagnostic test and initialising the pump.
One of the following screens will be displayed,
with a rotating 6-segment circular icon:
3. During the last part of the initialisation process, the
software version will be displayed, comprised of:
• Major revision in top left.
• Minor revision in bottom right.
This screen shows software version "V1.047".
11
Mains Power Disconnected
Minor Revision