Starting Therapy - Arjohuntleigh Flowtron ACS900 Notice D'utilisation

Starting Therapy

Tubeset
Connector 1
Tubeset
Connector 2
Tubeset
Connector 1
Tubeset
Connector 2
Tubeset
Connector 1
Tubeset
Connector 2
Tubeset
Connector 1
Tubeset
Connector 2
Make sure the garment(s) are fitted correctly to the
patient and the pump.
While the pump is in Standby, the LED indicators on the
front and underside of the pump remain extinguished.
Press the Middle Control button below the Start Therapy
icon to start the therapy. The LEDs on the front and
underside of the pump change to green.

If the pump is switched on and one or more
garments are connected to the pump, but therapy is
not started within 15 minutes, an alarm will occur.
If no action is taken to start therapy or silence the
alarm, then 15 minutes after the alarm starts, the
pump will go into an "Off" state (refer to
"Troubleshooting" on page 21).
13
No garment connected
Foot garment
Sequential (Tri Pulse) calf or
calf & thigh garment
No garment connected
Uniform (DVT) calf or calf &
thigh garment
Uniform (DVT) calf or calf &
thigh garment
Foot garment
Uniform (DVT) calf or calf &
thigh garment