Standards And Directives - MR TAPCON 230 Instructions De Montage

10 Technical data

10.13 Standards and directives

Maschinenfabrik Reinhausen GmbH 2021
Electromagnetic compatibility
Electrical safety
Measurement relays and protective de-
vices
Climatic ambient conditions
Degree of protection test
Environmental durability tests
Table 37: Standards and directives
7820658/02 EN
IEC 61000-6-2, IEC 61000-6-4,
IEC 61000-6-5
EN 60255-26
KN 61000-6-2, KN 61000-6-4
FCC 47 CFR Part 15 B
ICES-003
IEC 61010-1
IEC 61010-2-201
IEC 61010-2-030
EN 61010-1
UL 61010-1
CAN/CSA-C22.2 No. 61010-1
IEC 60255-1:2009 Section 6.10.1, 6.10.2
and 6.10.4
IEC 60255-27:2013 Section 10.6.4.2,
10.6.4.3, 10.6.4.4 and 10.6.5.3
IEC 60068-2-1 (-25°C; 96 h) cold
IEC 60068-2-2 (+70°C; 96 h) dry heat
IEC 60068-2-78 (+40°C / 93% rH, 96 h)
moist heat, constant
IEC 60068-2-30 (+55°C, 6 cycles 12 +
12 hours) moist heat, cyclical
IEC 60529
IEC 60255-21-1 vibrations class 1 (3 cy-
cles, 0.5g acceleration, 1 octave/min or
60 cycles, 1.0g acceleration, 1 octave/
min)
IEC 60255-21-2 shock class 1 (duration
11 ms, 5g or 15g acceleration, number of
axes 3)
IEC 60255-21-3 seismic class 1 (fre-
quency 1–35 Hz, 3.5 mm/1g acceleration
horizontal, 1.5 mm/0.5g acceleration ver-
tical, 1 octave/min, duration 10 min/axis)
IEC 60068-2-6 Vibration sinusodial
IEC 60068-2-27 shock
TAPCON
®
230 67