Scope Of Delivery; Design; Display, Operating Elements And Front Interface - MR TAPCON 230 Instructions De Montage

®
18 TAPCON 230

4.2 Scope of delivery

Check the shipment for completeness based on the shipping documents.
▪ Voltage regulator
▪ RJ45 patch cables
▪ Shield clamps
▪ Plug connectors
▪ Tension clamps
▪ Technical documents
▪ Additional nameplate
▪ Terminating resistor for CAN bus
▪ Terminating resistor for RS485 bus
Optional
▪ Housing for wall mounting
▪ Device type-dependent:
– Ethernet to FO converter (SFP module)
– Serial to FO converter

4.3 Design

4.3.1 Display, operating elements and front interface

Figure 2: Voltage regulator
1 REMOTE key
2 AUTO key
3 RAISE key
4 MANUAL key
5 LOWER key
2)
Activate REMOTE mode
Activate AUTO mode
Send a control command to the motor-
drive unit to increase the voltage.
Activate MANUAL mode
Send a control command to the motor-
drive unit to reduce the voltage.
7820658/02 EN
4 Product description
Maschinenfabrik Reinhausen GmbH 2021
1)
1)