MR TAPCON 230 Instructions De Montage page 29

6 Mounting
Maschinenfabrik Reinhausen GmbH 2021
Dimensions for the control panel cutout
Figure 12: Dimensions for the cutout
1. Cut out the section for the control panel.
Figure 13: Cutting out the section for the control panel
2. Slide the device into the cutout from the front and insert tension clamps.
Figure 14: Inserting the device into the cutout
7820658/02 EN
B: 202 mm (7.95 in)
B
®
TAPCON 230 29