Performing Tests - MR TAPCON 230 Instructions De Montage

NOTICE
®
48 TAPCON 230

6.5 Performing tests

Damage to device and system periphery
An incorrectly connected device can lead to damage to the device and sys-
tem periphery.
► Check the entire configuration before commissioning.
► Prior to commissioning, check the supply voltage and the measured volt-
age.
► Connecting the device to mains.
ð The display shows the MR logo and then the operating screen.
ð The voltage display LED on the top left of the device's front panel lights
up.
7820658/02 EN
6 Mounting
Maschinenfabrik Reinhausen GmbH 2021