Please Read Before Putting Into Operation - Trotec T500 Manuel D'utilisation

1. Please read before putting into operation

This measuring instrument has been constructed according to the
current state of the art and fulfils the requirements of the applica-
ble European and national guidelines. This conformity has been
proven; the manufacturer is in possession of the relevant declara-
tions and documents. You as a user must follow these operating
instructions in order to maintain this condition and to ensure safe
operation!
• Before using the device, this operating manual
must be read carefully and followed in all points.
• Before each measurement, appropriate measures
must be taken to ensure that no electrical cables, water pipes
or other supply lines are situated at the point of measurement.
• Do not measure on metallic surfaces.
• The determination of valid measuring results,
conclusions and actions derived from them are exclusively
the responsibility of the user! Any liability or guarantee
for the correctness of the results obtained is excluded.
Under no circumstances will any liability be accepted
for damage resulting from the use of the measurement
results that were obtained.
Operating manual – English
B - 2