Specifications; Special Accessories - Stihl GS 461 Notice D'emploi

Specifications

EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
Engine
STIHL single cylinder two-stroke engine
Displacement: 76.5 cm
Bore: 52 mm
Stroke: 36 mm
Engine power to 4.3 kW (5.8 HP)
ISO 7293: at 9,800 rpm
Idle speed: 2,500 rpm
Cut-off speed: 13,500 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor Bosch WSR 6 F,
type): NGK BPMR 7 A
Electrode gap: 0.5 mm
GS 461
This ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Regulations ICES-002.
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity:
Weight
Weight (dry, without bar and
chain):
Cutting Attachment (GS 461)
Rollomatic G guide bar
Bar lengths (3/8"
3
pitch):
Groove width:
3/8" diamond abrasive chain
36 GBM, Type 3210
Pitch:
Drive link gauge:
Chain Sprockets
8-tooth for 3/8" (rim sprocket)

Special Accessories

–
–
–
–
0.78 l
Ask your STIHL servicing dealer for
current information about this and other
special accessories.
7.6 kg
40 cm
1.6 mm
3/8" (9.32 mm)
1.6 mm
Check gauges
STIHL grease
STIHL filling system for fuel –
prevents spillage or overfilling
during filling
Guide bar straightener
English
33