Stihl GS 461 Notice D'emploi page 10

Masquer les pouces Voir aussi pour GS 461:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
The period of usage is prolonged by:
Hand protection (wearing warm
gloves)
Work breaks
The period of usage is shortened by:
Any personal tendency to suffer
from poor circulation (symptoms:
frequently cold fingers, tingling
sensations).
Low outside temperatures.
The force with which the handles
are held (a tight grip restricts
circulation).
Continual and regular users should
monitor closely the condition of their
hands and fingers. If any of the above
symptoms appear (e.g. tingling
sensation in fingers), seek medical
advice.
Maintenance and repairs
The machine must be serviced regularly.
Do not attempt any maintenance or
repair work not described in the
Instruction Manual. All other work should
be carried out by a servicing dealer.
STIHL recommends that maintenance
and repair work be carried out only by
authorized STIHL dealers. STIHL
dealers receive regular training and are
supplied with technical information.
Use only high-quality spare parts.
Otherwise, there may be a risk of
accidents or damage to the machine.
Contact a servicing dealer if in doubt.
8
STIHL recommends the use of genuine
STIHL spare parts. Such parts have
been optimized for the machine and the
user's requirements.
Before starting any maintenance or
repair work and before cleaning the
machine, always stop the engine – risk
of injury! – Exception: adjustment of
carburetor and idle speed.
To reduce the risk of fire due to ignition
outside the cylinder, move the slide
control to STOP or 0 before turning the
engine over on the starter with the spark
plug boot removed or the spark plug
unscrewed.
Do not service or store the machine near
a naked flame – risk of fire due to the
fuel.
Check fuel cap regularly for tightness.
Use only spark plugs that are in perfect
condition and have been approved by
STIHL – see "Specifications".
Inspect ignition lead (insulation in good
condition, secure connection).
Check that the muffler is in perfect
working condition.
Do not use the machine if the muffler is
damaged or missing – risk of fire! –
Hearing damage!
Never touch a hot muffler – risk of burns!
The condition of the antivibration
elements influences vibration behavior –
inspect antivibration elements
periodically.
Switch off the engine
to check the chain tension
to retension the chain
to change chains
for remedying malfunctions
Maintenance, replacement, or repair of
the emission control devices and
systems may be performed by any
nonroad engine repair establishment or
individual. However, if you make a
warranty claim for a component which
has not been serviced or maintained
properly or if nonapproved replacement
parts were used, STIHL may deny
coverage.
For any maintenance please refer to the
maintenance chart and to the warranty
statement near the end of the instruction
manual.
GS 461

Publicité

Chapitres

Table des Matières
loading

Table des Matières