Fueling - Stihl GS 461 Notice D'emploi

Fueling

Preparing the machine
Before fueling, clean the filler cap
N
and the area around it so that dirt
cannot fall into the tank
Always position the machine so that
N
the filler cap is facing upwards
WARNING
Never use a tool to open the bayonet
filler cap. This could damage the cap
and cause fuel to leak out.
Opening the twist lock
1.
2.
Press the filler cap down as far as
N
possible by hand, then turn it
counterclockwise (approx. 1/8 turn)
and remove
GS 461
Refuel
Take care not to spill fuel while fueling
and do not overfill the tank. STIHL
recommends use of the STIHL filling
system for fuel (special accessory).
Closing the filler cap
1.
2.
Fit the cap and turn it until it
N
engages in the bayonet catch
Press the cap down as far as
N
possible with your hand and turn it
clockwise (approx. 1/8 of a turn)
until it engages properly
Changing the fuel pickup body every
year
Drain the fuel tank
N
Pull the fuel pickup body out of the
N
tank with a hook and disconnect it
from the hose
Connect a new fuel pickup body to
N
the hose
Return the fuel pickup body to the
N
tank
English
15