Tractel tirsafe T3 Instructions D'emploi Et D'entretien page 15

11. Equipment compliance
TRACTEL SAS RD 619 – Saint-Hilaire-sous-Romilly
– F-10102 Romilly-sur-Seine France hereby declares
that the safety equipment described in this manual,
• complies with the requirements of European Directive
89/686/EEC of December 1989."
• is identical to the PPE, having been subject to the
"CE"-type-examination certificate issued by the
APAVE SUDEUROPE SAS – CS 60193 – 13322
Marseille – France, identified under the number 0082,
and tested according to the 2012 EN 795 standard.
• is subject to the procedure referred to in Art. 11B of
Directive 89/686/EEC, under the control of a notified
body: APAVE SUDEUROPE SAS – CS 60193 – 13322
Marseille – France, identified under the number 0082.
12. Periodic inspection and repair
An annual periodic inspection is required, but depending
on the frequency of use, environmental conditions
and regulations of the company or the country of use,
periodic inspections may be more frequent.
Periodic inspections should be carried out by an
authorised and competent technician, in compliance
with the manufacturer's instructions transcribed in the
file "TRACTEL PPE inspection instructions".
®
Confirmation of the legibility of the product markings
should be an integral part of the periodic inspection.
On completion of the periodic inspection, the return to
service must be indicated in writing by the authorised
and competent technician who carried out the
inspection. This return to service must be recorded on
the inspection sheet in the middle of this manual. This
inspection record should be retained throughout the
product's life cycle, up until it is recycled.
After arresting a fall, this product must undergo a
periodic inspection as described in the current article.
The product's textile components must be changed,
even though they may not display any visible changes.
13. Lifespan
TRACTEL textile PPE equipment such as harnesses,
®
lanyards, ropes and energy absorbers, TRACTEL
mechanical PPE equipment such as stopcable™ and
STOPFOR™ fall-arresters, blocfor™ self-retracting
fall-arresters, and the TRACTEL
used without restrictions from their manufacturing date
providing that they are subject to:
– Normal use in accordance with the recommendations
for use given in this manual.
– A periodic inspection, which must be performed at
least once a year by an approved and competent
technician. On completion of this periodic inspection,
it must be certified in writing that the PPE is fit to be
returned to service.
– Strict compliance with the storage and transport
– As a general rule and subject to the application of the
The marking on each product indicates:
a: the trade name: TRACTEL
b: the name of the product,
c: the referenced standard,
d: the product reference,
e: CE Logo followed by the number 0082, identification
f:
g: the serial number,
h: a pictogram showing that the manual must be read
i:
k: the location of the anchor line,
m: the type of anchor line to be exclusively used,
n: diameter of belay support to be used,
p: the maximum number of users,
s: maximum length of the lifeline,
w: Maximum operating load,
aa: Date of next inspection.
When disposing of the product, all components must
be recycled by firstly sorting them into metallic and
synthetic materials. These materials must be recycled
by specialist bodies. During disposal, dismantling and
separating the components should be undertaken by a
duly trained person.
Name and address of manufacturer:
TRACTEL SAS
RD 619 - BP 38 Saint Hilaire sous Romilly
10102 Romilly sur Seine.
®
lifelines can be
®
conditions contained in the current manual.
conditions of use mentioned above, their lifespan may
exceed 10 years.
14. Marking
number of the approved body responsible for
production control,
Year and week of manufacture,
before use,
an arrow indicating the position for use,
15. Withdrawal from service
,
®
15
GB