Tractel tirsafe T3 Instructions D'emploi Et D'entretien page 11

• Net weight: 750 g.
R
R
Tension indicator (Fig. 9, marked C)
The voltage indicator enables checking by alignment of
a hole and a notch, that the pre-tension of the cable is
100 daN.
A good steel rope tension ensures, in case of fall, the
correct operation of all the constituent elements of the
life line.
• Material: Stainless steel.
• Resistance: 30 kN.
• Net weight: 900 g.
C
Ø 50
Ø 15
Shock absorber/damper (Fig. 9, marked D)
The damper is intended to dissipate the energy
transmitted to the anchor structure by the fall of an
operator connected to the lifeline. It can only be used
once. It does not exempt you from equipping each
operator with a fall arrest system. Each shock absorber
Each shock absorber comes with a quick link connector
(J).
• Material: Stainless steel.
• Resistance: 30 kN.
• Net weight: 400 g.
GB
134
11