First Lighting - Rizzoli X Basic Manuel D'utilisation

+
-
Picture 20 – Regulation of the hinges
2.15

FIRST LIGHTING

Before starting to use the cooker, remove the
packaging materials in the oven and in the wood
box, remove the stickers and remove the plastic
film in which is wrapped the plate and remove with
a rag the most of the oil on its surface. We suggest
to make a first lighting of the device just to verify
the correct installation. The first lighting must be
2.16 SETTLEMENTS
All the refractory materials inside the stove experi-
ence a settlement process that may generate small
holes on the bricks, such holes do not preclude an-
yway the working of the stove.
Other settlements may involve other parts of the
± 3 mm
+
+ 3/-2 mm
done with moderate fire, using little wood broken
in small pieces. In the next lightings you can pro-
gressively increase the load of combustible.
During the first lightings some smell due to pro-
cessing residuals might happen. This phenomenon
is normal, it requires the ventilation of the room
and will disappear quickly.
stove so during the heating and cooling phases
you might hear light noises. These symptoms do
not absolutely preclude the use of the stove and
fade out till disappearance with the constant use
of the stove.
82
± 2 mm
+
-
-