Rizzoli X Basic Manuel D'utilisation page 78

Now it is possible to remove the connector of the
upper flue outlet and simultaneously the closing
caps of the upper flue outlet. The connector shall
be screwed on the rear part of the stove while the
closing cap shall be placed and fixed on the upper
flue outlet.
The device inserted in the connector, in case of
rear flue outlet, can be removed, assuming that its
WARNING! Check carefully that the gasket on the connector and on the cap does not
have deformations that could compromise the correct working of the stove.
1
Picture 13 – Predisposition of the rear flue outlet.
A
C
2
function is to block eventual pieces of tar in case
of straight chimneys without ash collection points
(see chapter 4.8, picture 25).
Once completed this operation, the rear covering
must be replaced, removing the closing cap and
finally the cap, adding to it the cap given together
with the device.
B
3
D
76