Rizzoli X Basic Manuel D'utilisation page 83

For the rear connection or the connection on the
floor it is necessary to remove the caps placed in
the lower part of the stove, to insert the flexible
pipe in the passages and then fix it on the air intake
WARNING! Aspiring hoods or extracting air fans in the room may generate problems
to the device if there is not a suited air intake or in case of air intake sub-dimensioned.
2.14 WOOD VAIN LEAF (OPTIONAL)
On X Basic, X Plus and X Chef stoves it is possible to
add on demand a leaf with assisted closure studied
to hide the wood vain. The installation of the wood
vain leaf must be done when the stove is cold.
Nr. 2,5
x 2
A
C
Picture 19 – Wood vain leaf.
operating frontally on the stove.
To make the operation easier, it is suggested to re-
move the interspace sheet close to air intake lifting
it up and taking it out towards yourself.
The first thing to do is to fix the small steel sheet
with the magnets using two screws in the right
part of the stove, then hook the two hinges to the
leaf in the left part, as in picture 19.
x 4
B
x 4
81