Tubing Care - Medela Sonata Mode D'emploi

6B. Tubing Care
• Tubing does not need to be washed
before fi rst use.
• Inspect tubing after each pumping session.
To properly clean your tubing
1
Turn off breast pump and unplug
from power source.
3
Remove tubing from breast shield.
Questions? Visit www.medela.com or call us at 1-800-435-8316.
Caution
• Do not store wet or damp parts as mold
may develop.
• If tubing becomes moldy, discontinue use and
replace tubing. To fi nd replacement parts visit
www.ShopMedela.com (USA) or
www.medelastore.ca (Canada)
• Do not use breast pump with wet tubing;
doing so will cause damage to your
breast pump.
2
To remove tubing from the breast pump,
grab the tube adaptor and pull directly
from the tubing port. Do not wiggle or
pull tubing at an angle.
Washing tubing
4
• Rinse tubing in cool water.
• Wash tubing in warm, soapy water.
• Rinse tubing with clear water.
• Shake out water droplets.
• Hang to air dry.
15