Powering Your Breast Pump; Battery Care & Status Codes - Medela Sonata Mode D'emploi

10. Powering Your Breast Pump

10A. Charging the Breast Pump
There are two ways to power your breast pump for your pumping session:
20 20
Rechargeable Battery
1
• Before fi rst use, charge the breast
pump battery for 12 hours with the
power adaptor. The battery icon
will appear fully charged on the
display when charging is complete.
• Proceed to Section 11, Operating
Your Breast Pump, to begin your
pumping session.
10B. Battery Care & Status Codes
Your breast pump contains a Lithium ION rechargeable battery.
T Tip
• Before using on battery power for the fi rst time, fully charge your breast pump for
12 hours.
• You can use your breast pump while charging the battery. The battery will charge as soon as
the breast pump is connected to a power source. It will not charge while the pump is running.
• Keep your pump in a cool place.
• Keep your battery charged.
• Fully charge the battery before storing your pump for an extended period of time.
• Recharge the battery before it completely drains. This is better for the lifecycle of
the battery.
• If your breast pump has been stored in a hot location, it may not run on battery power right away.
To resume normal battery function, allow the breast pump to cool for one hour. During this time,
you can use your breast pump when plugged into external wall power.
sonata sonata
Power Adaptor
2
OR
• Plug power cord into the power
adaptor port on the back of the
breast pump. Plug power cord
into power source.
• Proceed to Section 11, Operating
Your Breast Pump to begin your
pumping session.