Set-Up Menu "Setup2 - Sartorius Stedim Biotech CERTOMAT IS Mode D'emploi

3.3.6 Set-up menu "SETUP2"

•
In pressing the [F5] key you change to the "SETUP2-menu" for the input of the device parameters.
•
All set-ups and modifications are memorized internally and remain active also after voltage loss or switching off and on!
LANG DIAG.
CONTRAST +/-
TIME SERVICE SETUP1
Fig. 35: Setup1 menu
The following "device parameters" (fig. 36) can be adjusted:
F1
Device options can be activated or deactivated in a list as well as device information can be called.
•
An arrow marks the respectively activated parameter.
•
In pressing the keys [+/-] the arrow can be moved.
•
In pressing the [ENTER] key the YES / NO-definitions are directly modified or numeric values are released for modification
(value flashes).
•
In pressing the keys [+/-] the respectively flashing value can be adjusted.
•
In pressing the key [ENTER] the adjusted value is confirmed.
•
In pressing the [ESC] key you jump back to the SETUP2 menu.
Temp.Offset
Light
August 2002
Ser. No.
<
ALERTS
DEVICE:
0,0 Actual value correction for the 1.PT100 (for temperature regulation).
Calibrating values can be adjusted. The digit sign can be modified by
pressing the [F1 ... F5] keys.
YES Illumination active
NO Illumination inactive
111 Software version
(here version 1.11)
39 Hardware serial number
(here no. 39)
F5 >
ESC
DEVICE
Fig. 36: Setup2 menu
Activation of different device options
SETUP PASSW
SETUP2
31