Starting Of A Program - Sartorius Stedim Biotech CERTOMAT IS Mode D'emploi

3.3.4.5 Starting of a program

•
In pressing the [START] key afterwards you change to the setup mode of the program selected before, here program 1 "PROG1".
flashes
*
PROG1 PROG2
ENTER programmed
START starts
PROG4 PROG5
Fig. 27: PROG1-4: program menu
The following parameters in the start menu (fig. 28) can be adjusted:
F1
•
After pressing of [F1] the input field "TIME" flashes.
•
In pressing the [+/-]-key the time is adjusted.
•
Confirm input with [ENTER].
F2
•
After pressing of [F2] the input field "DAY" flashes.
•
After pressing of the [+/-] keys the date is adjusted.
•
The current date and the current time are respectively preadjusted.
•
Confirm input with [ENTER].
F3
•
After pressing of [F3] the automatic program repeat is activated / deactivated.
•
At activated program repeat the "STEP 1" to "STEP 5" of the program is processed in an endless loop.
•
The "PRSTEP" is cycled only at the first time.
*
START
<
PROG3
PROG1
TIME:
DAY:
REPEAT:
>
ESC
TIME
08:15
Fig. 28: start menu
Set-up of the time (start time of the program)
Set-up of the date (start date of the program)
Set-up of repeat
DAY REPEAT
30.04.99 ON
START
PROG1
23