Sartorius Stedim Biotech CERTOMAT IS Mode D'emploi page 76

•
With the key [F5] you can alternately change to another display field in order to indicate all actual values.
HEAT
OFF
Fig. 8: Operating mode RUN
•
The "TIMER" runs. The respective rest operating time is indicated.
In the operating mode the ACTUAL values are indicated.
A changement of the values is not possible here!
•
In pressing the function keys [SPEED], [TEMP], [COOLING] and [LIGHT] a little bit longer the parameter flashes and the SET-value
is indicated. After the release of the function keys the ACTUAL-values are indicated again.
•
The ACTUAL value display of the temperature refers to the air temperature in the incubation room.
• In pressing the key [STOP] you jump back to the manual menu "MAN".
•
Heating, cooling, light and shaker are switched off.
•
A new set-up can be effected.
•
After the adjusted operating time is finished, you jump automatically back to the manual menu "MAN".
•
After pressing of the [STOP]-key the cooling is still running for 3 minutes. Switching the cooling on again is only possible after 3
minutes.
14
<
COOL LIGHT
OFF OFF
< - > RUN
F5 >
SPEED
125
01:23
TIME
Fig. 9: Operating mode RUN
TEMP1
23.4°C
< - > RUN