Password Protection For Programs - Sartorius Stedim Biotech CERTOMAT IS Mode D'emploi

3.3.4.3 Password protection for programs

•
The "password protection" (code) for programs serves for the protection of programs which have been once established for this
purpose against unauthorized access. The content of the program cannot be modified without knowing the password. Optionally
also the "starting" and „stopping" of the programs can be protected by this password.
•
After pressing of the [ENTER] key you change to the menu where you input the "password" (code) for the respective active
program.
•
For safety reasons the "password" must be input twice if the password is determined.
PRSTEP
ON
0:00
STEP3
Fig. 23: program definition of
PROG1
•
In pressing the function keys [F1] ... [F5], [+], [-], [START] or [STOP] as admissible signs the "password" (code)
(visible " " on the display) is given in.
•
The "password" (code) must have at least 4 and at most 7 places.
•
After the input of the password the "password" (code) must be confirmed with the [ENTER] key. Then you change automatically
to the confirmation of the password which has been input.
•
After the repeated input of the password the "password" (Code) must be confirmed once again with the [ENTER] key in order to
secure the "password input". At the same time the back jump to the "program definition menu" is effected.
•
In pressing the [ESC] key the "password determination" can be stopped. All "password inputs" which have been effected until this
time become invalid.
STEP1 STEP2
0:00 0:00
0:00
STEP4 PROG1
ENTER >
PASSWORD
INPUT:
Fig. 24: determination of password for
PROG1
21