Publicité
English
WARNING
■ Extreme temperatures can damage the battery
and may also cause the battery to generate
heat, rupture, leak, ignite or explode, resulting
in severe or fatal personal injury or property
damage. Never charge, use or store the bat‐
tery outside the specified ambient temperature
limits,
25.7.
To properly store the battery:
► Remove the battery from the chain saw.
► When storing the battery, maintain a charge of
40 % to 60 % (2 green LEDs).
► If storing the battery in the charger, disconnect
the charger from the outlet.
► Make sure the battery is dry and store it
indoors in a dry and secure location.
► Keep it out of the reach of children and other
unauthorized persons.
► Protect the battery against dampness and cor‐
rosive agents such as garden chemicals and
de-icing salts.
► Protect the battery from exposure to conduc‐
tive liquids such as salt water.
► For maximum battery life, store the battery at
an ambient temperature between 50 °F and
68 °F (10 °C and 20 °C) with a charge
between 40 % and 60 % (2 green LEDs).
► Do not leave spare batteries unused. Use
them in rotation.
NOTICE
■ A battery that is not stored properly may expe‐
rience deep discharge, which can result in per‐
manent damage. To avoid deep discharge:
► Remove the battery from the chain saw
after finishing work.
► For maximum battery life, store the battery
with a charge between 40 % and 60 % (2
green LEDs).
► If storing the battery in the charger, discon‐
nect the charger from the outlet.
► For maximum battery life, store the battery
at an ambient temperature between 50 °F
and 68 °F (10 °C and 20 °C).
21.3
Charger
To properly store the charger:
► Disconnect the charger from the electrical out‐
let.
34
1
► Wrap the power supply cord and attach it to
the charger.
► Store the charger indoors in a dry and secure
location.
► Keep it out of the reach of children and other
unauthorized persons.
► Never hang the charger by its power supply
cord or cord bracket (3).
22 Cleaning
22.1
Cleaning the Chain Saw, Bat‐
tery and Charger
WARNING
■ To reduce the risk of personal injury from unin‐
tended activation, remove the battery and
engage the chain brake before carrying out
any cleaning work,
saw should carry out only the cleaning descri‐
bed in this manual.
To clean the chain saw, battery and charger:
► Clean the chain saw's polymer components
with a slightly dampened cloth. Do not use
detergents or solvents. They may damage the
polymer components.
► Remove the sprocket cover and clean the
area around the chain sprocket with a slightly
dampened cloth or resin solvent, such as
STIHL Resin Remover & Lubricant.
► Do not use a pressure washer to clean the
chain saw or otherwise spray it with water or
other liquids.
► Keep the battery housing and guides free from
foreign matter and clean as necessary with a
soft brush or soft, dry cloth.
► Keep the charger housing and electrical con‐
tacts free from foreign matter. Clean as neces‐
sary with a soft brush or soft, dry cloth. Always
unplug the charger before cleaning.
22 Cleaning
2
3
8. Users of this chain
0458-022-8201-A
Publicité
