Publicité
English
– The drive link gauge (2) of the chain must
match the groove width of the guide bar (3).
14.2
Mounting and Removing the
Guide Bar and Chain
14.2.1
Mounting the Guide Bar and Chain
WARNING
■ Make sure the battery is removed and the
chain brake is engaged before starting assem‐
bly. Never operate your chain saw without a
properly mounted guide bar and chain,
Use only guide bar and chain combinations
expressly recommended or approved by
STIHL,
5.4.
WARNING
■ The chain has many sharp cutters. If they con‐
tact your flesh, they will cut you, even if the
chain is not moving,
heavy-duty work gloves when mounting or oth‐
erwise handling the chain,
To mount the guide bar and chain:
► Switch off the chain saw,
► Engage the chain brake,
► Remove the battery,
1
3
► Raise the handle (1) of the wingnut (2).
► Turn the wingnut counterclockwise until the
chain sprocket cover (3) can be removed.
► Remove the chain sprocket cover.
5
4
► Remove the tensioning gear (4).
► Remove the screw (5).
26
5.5.
5.4. Always wear
5.3.
17.1.
15.1.
16.2.
2
6
5
4
14 Assembling the Chain Saw
► Position the guide bar (6) on the tensioning
gear so that the pins of the tensioning gear fit
in the holes of the guide bar.
► Insert the screw and tighten it.
4
► Position the chain in the groove of the guide
bar, starting at the tip.
► Make sure that the cutters in the groove on the
top side of the guide bar face the tip of the bar.
STIHL chains are manufactured with arrows
on the tie straps to help the operator deter‐
mine the proper direction of the chain. Arrows
on the tie straps on the top of the bar must
point toward the bar tip.
► Turn the tensioning gear clockwise until it
stops.
2
3
► Point the guide bar tip away from the chain
sprocket (2), with the teeth of the tensioning
gear (4) facing away from the motor.
► Place the chain around the chain sprocket.
► Slide the guide bar over the collar screw (3).
The head of the collar screw must protrude
into the oblong hole.
► Disengage the chain brake,
6
4
4
15.2.
0458-022-8201-A
Publicité
