Publicité
21 Storing the Chain Saw, Battery and Charger
► When transporting the saw by hand, hold it by
the front handle with the guide bar pointing
backwards, opposite the direction in which you
are walking.
► When transporting the saw in a vehicle, cover
the guide bar with a chain scabbard. Secure
and position the chain saw to prevent turn‐
over, impact and damage.
Your saw comes standard with a chain scabbard
that matches the cutting attachment. If you use
guide bars of different lengths on the saw, the
length of the chain scabbard must be matched to
the guide bar to reduce the risk of injury. It
should cover the full length of the guide bar.
20.2
Battery
WARNING
■ To reduce the risk of a short circuit, which
could lead to electric shock, fire and explosion,
never transport the battery with small metal
objects capable of conducting electricity (e.g.,
paper clips, nails, coins, keys),
When transporting the battery:
► Secure the battery in a container against
impact or damage. Never transport the battery
with small metal objects capable of conducting
electricity (e.g., paper clips, nails, coins, keys).
► If you are transporting the battery in a vehicle,
secure it and its container to prevent turnover,
impact and damage.
STIHL batteries comply with the requirements
set forth in UN-Manual of Tests and Criteria, Part
III, Subsection 38.3.
Commercial air, vessel and ground transporta‐
tion of lithium ion cells and batteries is regulated.
The battery is classified as a UN 3480, Class 9,
packaging group II product. Shipping it, either as
a complete tool or the battery, requires compli‐
ance with all applicable shipping regulations.
Check with the ground, vessel, air cargo or pas‐
senger airline to determine if transport is prohibi‐
ted or subject to restrictions or exemptions prior
to shipping or travel.
Normally, no further conditions have to be met by
the user in order to transport STIHL batteries by
road to the power tool's operating site. Check
and comply with any special regulations that may
apply to your situation.
For further information please go to www.stihl.ca.
0458-022-8201-A
20.3
To properly transport the charger:
► Disconnect the charger from the electrical out‐
let.
► Remove the battery from the charger.
► Wrap the power supply cord and attach it to
the charger,
► When transporting the charger in a vehicle,
ensure that it is secured in a manner that pre‐
vents turnover, impact and damage.
21 Storing the Chain Saw,
21.1
■ Store the chain saw indoors in a dry, secure
place that cannot be accessed by children or
other unauthorized users,
the battery in the chain saw. Improper storage
can result in unauthorized use and damage to
8.
the chain saw,
When storing the saw for thirty days or longer:
► Remove any wood chips or debris from the
battery compartment.
► Remove the chain and guide bar.
► Clean and spray the guide bar with a resin sol‐
vent, such as STIHL Resin Remover and
Lubricant.
► Clean the saw,
► Fill up the chain oil tank,
► Store the saw indoors in a dry and secure
location, out of the reach of children and other
unauthorized persons.
21.2
■ To reduce the risk of a short circuit, which
could lead to electric shock, fire and explosion,
never store the battery with small metal
objects capable of conducting electricity (e.g.,
paper clips, nails, coins, keys),
tery is damp or wet, allow it to dry thoroughly
before storing,
Charger
21.3.
Battery and Charger
Chain Saw
WARNING
5.4.
22.1.
Battery
WARNING
8.
English
5.4. Never store
14.4.2.
8. If the bat‐
33
Publicité
