Publicité
INSTRUCTIONS FOR USE
3
Equipment Setup and Use:
Prior to use:
a. Inspect the product looking for any visible damage or sharp edges that
could be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped
dry prior to each use.
c. Verify Hook/Loop Straps are in good condition
d. Verify table under Radiolucent Spine Surgery Frame is rated for patient
weight. (If this information is not available confirm rating with table
manufacturer prior to loading a patient).
e. Verify Velcro Straps are in good condition.
Setup:
1. Hold Radiolucent Spine Surgery
Frame above table and verify
there is enough room to lower
the frame.
2. Place Frame on OR table with
Buttons facing head end of OR
table.
3. Ensure enough room for head
positioner.
4. Ensure
between OR table rails.
Document Number: 80028263
Version: B
All manuals and user guides at all-guides.com
frame
is
centered
Page 12
Issue Date: 25 MAR 2020
Ref Blank Template: 80025118 Ver. E
Publicité
