Publicité
Dirty Water Tank
1. Remove the dirty water tank, open its cover and pour out the dirty water.
2. Wash the tank with clean water, then reinstall it to the omni station.
Note: The float ball in the dirty water tank is a movable part. Do not apply too much
force when cleaning it to avoid damaging it.
Sensors and Charging Contacts
Use a soft cloth to clean all sensors and chraging contacts in the robot
vacuum:
· The cliff sensors and the ultrasonic sensor on the bottom of the robot
vacuum
· The charging contacts on the back of the robot vacuum
· The edge sensor on the side of the robot vacuum
· The LDS laser sensor on the top of the robot vacuum
· The bumper, the AI visual recognition sensor, and the line laser sensors
on the front of the robot vacuum
Cliff Sensor
AI Visual Recognition Sensor
Line Laser Sensor
LDS Laser Sensor
Edge Sensor
Bumper
Charging Contacts
Ultrasonic Sensor
17
Publicité
