Télécharger Imprimer la page

Xiaomi Robot Vacuum X10+ Manuel D'utilisation page 23

Publicité

Filter
1. Remove the filter from the filter clip as illustrated.
2. Rinse and gently tap the edges of the filter to remove any dust and
debris until it is clean.
Note: Do not attempt to clean the filter with a brush or finger.
3. Open the dust compartment cover, fill the dust compartment with clean
water and close the dust compartment cover. Shake the dust
compartment from side to side and then pour the dirty water out of the
compartment.
CAUTION: Only use clean water to clean the filter. Do not use detergent.
4. Place the dust compartment and filter aside to dry before
reinstallation.
Note: Thoroughly dry the dust compartment and the filter before putting them back.
19

Publicité

loading