Publicité
How to Use
Add Water to the Clean Water Tank
Fill the clean water tank with clean water up to the maximum water level
mark.
CAUTIONS:
· Do not add water above the maximum water level mark (MAX).
· Do not add hot water to the water tank, as this may cause the tank to become
deformed.
· Do not add any cleaning agents or disinfectants to the water tank.
12
MAX
Connect with Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*. Use the Mi
Home/Xiaomi Home app to control your device, and to interact with
other smart home devices.
Scan the QR code to download and install the
app. You will be directed to the connection
setup page if the app is installed already. Or
search "Mi Home/Xiaomi Home" in the app store
to download and install it.
Open Mi Home/Xiaomi Home app, tap
upper right, and then follow prompts to add
your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name
of the app displayed on your device should be taken as the default.
Notes:
· This robot vacuum works with the Mi Home/Xiaomi Home app, and it supports
Android 4.4 & iOS 10.0 or above.
· Only 2.4 GHz Wi-Fi networks are supported.
· The version of the app might have been updated, please follow the instructions
based on the current app version.
Reset Wi-Fi
When there is a connection loss between your phone and the robot
vacuum due to the router reconfiguration, wrong password or so, please
follow the steps below:
1. Open the cover of the robot vacuum so that you can see the Wi-Fi
indicator.
2. Simultaneously press and hold the buttons
a voice to indicate that the robot vacuum is waiting for the network
configuration.
3. When the Wi-Fi indicator blinks, the Wi-Fi connection has been reset
successfully.
on the
C4576F12
and
until you hear
Publicité
