Publicité
Fault
The
menu item is not visi-
rF
ble
Only the
menu item is
SYS
visible in the
menu
rF
noChG
is displayed if the
WiFi function activated
(
rF
\
SYS
\
On
)
is displayed
Id:Er
10
SERVICING
11
TECHNICAL DATA
11.1
General technical data
Dimensions
• Depth
• Width
• Height (measuring rod not extended)
Weight of measuring station
•
seca 787
•
seca 797
Ambient conditions, operation
• Temperature
• Air pressure
• Humidity
Ambient conditions, storage
• Temperature
• Air pressure
• Humidity
Ambient conditions, transport
• Temperature
• Air pressure
• Humidity
Cause
The internal interface module of the de-
vice is defective
The WiFi function is deactivated
The device is in battery mode
The ID of the user or the patient has not
been found in the EMR system
The product needs to be set up carefully and serviced regularly. Depending on
how frequently the product is used, seca recommends servicing at intervals of 3
to 5 years.
CAUTION!
Faulty measurements as a result of poor servicing
► Have servicing and repairs carried out exclusively by seca Service
or an authorized service partner.
► You can find your local service partner at www.seca.com.
Remedy
• Inform seca Service
Activate WiFi function
• Use power supply unit (recommended)
• In the
\
menu, select the option
rF
SYS
PErM
• Rescan ID
• If the problem persists, contact your ad-
ministrator or hospital technician
+10 °C to +40 °C / +50 °F to 104 °F
30 % – 80 %, no condensation
-10 °C to +65 °C / +14 °F to 149 °F
0 % – 95 %, no condensation
-10 °C to +65 °C / +14 °F to 149 °F
0 % – 95 %, no condensation
English
576 mm
410 mm
1356 mm
Approx. 12.9 kg
Approx. 13.1 kg
700 – 1060 hPa
700 – 1060 hPa
700 – 1060 hPa
Servicing • 45
Publicité
