6
OPERATION
6.1
Switching the device on and off
Switching on the device
Switching off the device
6.2
Switching units of measurement (variant-dependent)
NOTE
Further settings need to be made to enable measurement data to be
transmitted to an EMR system via the
► Observe the
1. Ensure that the device has no load.
2. Press the
key.
ð All the elements of the display are shown briefly.
ð
is displayed.
SECA
ð The device is ready for operation when
► Press the
key.
NOTE
In battery mode, the device remains on standby for 30 seconds. If
there is no input or no load is put on the weighing platform during the
standby time, the device switches off automatically.
CAUTION!
Patient hazard
To prevent misinterpretations, measuring results for medical purposes
must only be displayed and used in SI units (kilograms/grams, meters/
centimeters). Some devices have the option of displaying measuring
results in different units. This is purely an additional function.
► Only use measuring results in SI units.
► The user takes sole responsibility for the use of measuring results in
non-SI units.
You can switch between the metric units kilograms and centimeters and the im-
perial units pounds and feet/inches during the measurement procedure. The
units of weight and height change at the same time.
► Press and hold the
kg/lbs
changes.
seca connect 103
system instructions for use.
seca 103/452
is displayed.
0.0
key until display of the unit of measurement
English
software.
Operation • 33