Télécharger Imprimer la page

Seca 787 Mode D'emploi page 34

Masquer les pouces Voir aussi pour 787:

Publicité

6.3
Measuring weight
Taring off additional weight
34 • seca 787/797
Weighing
CAUTION!
Injury from incorrect position of the measuring flap
Injuries may result if the measuring flap is at patient height when folded
out.
► Ensure that the measuring flap is positioned well above the pa-
CAUTION!
Faulty measurement as a result of force shunt
If the patient is in contact with parts other than the weighing platform
during the weight measurement, the device will not measure correctly.
► Ensure that the patient is in contact only with the following parts
1. Ask the patient to step onto the weighing platform.
2. Ask the patient to keep still.
3. Read off the measuring result.
Use the
Tare
fecting the patient's weight value.
(Tare)
CAUTION!
Faulty measurement as a result of force shunt
If an additional weight is touching the surface on which the device is
standing, the weight will not be measured correctly.
► Make sure that additional weights are placed only on the weighing
NOTE
The maximum weight which can be displayed is reduced by the
weight of the objects which have been tared.
1. Place the additional weight on the weighing platform.
2. Press the
ð The message
3. Wait until the display stops flashing and
NOTE
If you remove the additional weight again,
4. Ask the patient to step onto the weighing platform with the additional weight
(or carrying the additional weight).
ð The patient's weight is displayed. The additional weight is deducted auto-
matically.
5. Read off the measuring result.
6. To deactivate the
NOTE
When you switch the device off, the
matically.
tient's head before the patient steps onto the weighing platform.
during weight measurement: Weighing platform and
handrail (if present).
function to prevent an additional weight (e.g. a walking stick) af-
platform.
Tare
key.
is displayed.
NET
function, press the
Tare
seca 477
is displayed instead.
0.0
will be displayed.
- - - - -
key.
Tare
Tare
function is deactivated auto-

Publicité

loading

Ce manuel est également adapté pour:

797