Publicité
Item
Control
4
5
6
7
8
9
Workflow LED
14 • seca 787/797
key
Tare
• During the measurement procedure:
– Activate/deactivate
Tare
• In the menu:
– No function
key
Menu
• During the measurement procedure:
– Call up menu (press and hold key)
• In the menu:
– Go back one menu level/exit menu (press key briefly)
key
Hold
• During the measurement procedure:
– Activate/deactivate
Hold
• In the menu:
– Select menu item, submenu or setting
• Increase value (press and hold key to increase the value more quickly)
key
BMI
• If measured values are present:
– Activate
function
BMI
• In BMI mode:
– Deactivate
function
BMI
• In the menu:
– Select menu item, submenu or setting
– Decrease value (press and hold key to decrease the value more quickly)
Confirm key
• If measured values are present:
– Transmit measuring results to an EMR system via
active interface module)
• In the menu:
– Confirm selected menu item
– Save set value
Shows the status of data recording and transmission (condition: active interface module):
• Illuminated in green: Measurement procedure is active
• Flashing green (approx. 5 seconds): Submitting measuring results to the EMR system (de-
pending on setting)
• Illuminated in green (approx. 5 seconds): Measuring results successfully sent to the EMR
system (depending on setting)
• Illuminated in red (approx. 5 seconds): Error in data transmission or measurement proce-
dure
NOTE
► The data recorded and transmitted are set in the
you have any queries, contact your administrator or hospital technician.
► The
seca 452
the
measuring station
seca 787
787), page 47).
Function
function
function
external interface module is available as an optional accessory for
(ž Optional accessories and spare parts (seca
software (condition:
seca connect 103
software. If
seca connect 103
Publicité
