Publicité
7
HYGIENE TREATMENT
7.1
Cleaning
7.2
Disinfecting
42 • seca 787/797
WARNING!
Electric shock
The device is not de-energized when the on/off button is pressed and
the display goes out. Use of fluids on the device may cause an electric
shock.
► Before each hygiene treatment, ensure that the device is switched
off.
► Disconnect the power supply connector before each hygiene treat-
ment.
► Take the batteries out of the device before every hygiene treat-
ment.
► Ensure that no fluids penetrate the device.
WARNING!
Risk of infection
► Subject the device to a hygiene treatment at regular intervals as
described in this section.
NOTICE!
Damage to device
Unsuitable cleaning agents and disinfectants may damage the sensi-
tive surfaces of the device and lead to transparent components be-
coming clouded.
► Do not use aggressive or abrasive cleaning agents.
► Do not use organic solvents (e.g. white spirit or petroleum spirit).
► If required, moisten a soft cloth with a mild soap solution and wipe the device
over with it.
1. Disinfect the device at regular intervals with a disinfectant suitable for sensi-
tive surfaces and acrylic glass (e.g. 70 % ethanol).
2. Follow the instructions for use for the disinfectant.
3. Disinfect the device as follows:
► Moisten a soft cloth with disinfectant and wipe down the device with it.
► Comply with the intervals, see table:
Interval
and
Before
af-
• Weighing platform
ter
each mea-
• Head slide with measuring flap
• Handrail (if present)
surement
• Column, display unit and display head
As required
• Telescopic elements of the measuring rod
• Recessed handle
Component
Publicité
