Publicité
Permanently displaying the
weight (Hold)
6.4
Measure height
Measuring heights < 1.22 m
If you activate the
function, the weight value is displayed permanently.
Hold
1. Press the
Hold
key.
ð The display flashes until a stable weight is measured.
ð The weight is displayed permanently.
ð The message
HOLD
2. Read off the measuring result.
3. To deactivate the
Hold
NOTE
You can select which action automatically clears the displayed weight
value from the display
value
(HOLd), page 39).
You can measure height using the integrated measuring rod.
CAUTION!
Injury from incorrect position of the measuring flap
Injuries may result if the measuring flap is at patient height when folded
out.
► Ensure that the measuring flap is positioned well above the pa-
tient's head before the patient steps onto the weighing platform.
1. Ensure that the upper telescopic element is in its lowest position.
2. Release the head slide by pressing on the lock and moving the head slide
downward.
3. Fold up the measuring flap until it engages in a horizontal position.
4. Ask the patient to stand under the measuring flap and to stand up straight.
5. Push the head slide down until the measuring flap is in contact with the pa-
tient's head.
is displayed.
function, press the
Hold
(ž Setting permanent display of the weight
English
key.
Operation • 35
Publicité
