Publicité
6.6
Scanning ID(s) and transmitting data via WiFi (seca 797)
6.7
Other functions (menu)
Activating/deactivating the
Autohold function (AHOLd)
38 • seca 787/797
The internal interface module of the device wirelessly connects the measuring
device to an EMR system via the
A barcode scanner can be used to record the ID of the patient and/or the ID of
the user. A WiFi connection transmits the measuring results to the electronic pa-
tient file via the
seca connect 103
The following conditions need to be met in order to use these functions:
• WiFi function of the device is active
• Device is connected to an EMR system via the
• Barcode scanner is connected to the device
The measurement procedure consists of the following steps:
• Record ID(s) using the barcode scanner
• Record weight and/or height
• Transmit measuring results to the
NOTE
The height must be permanently displayed (
transmitted to the
ment procedure can be adapted on an individual basis. The options
that are active depend on the settings made in the
software.
1. Observe the system instructions for use of
(section "7.5 Administering seca measuring devices" and
"10. Operating connected seca measuring devices").
2. Contact your administrator or hospital technician.
Other functions and settings are available in the menu. For a summary of the
menu structure, see the section entitled "Overview".
NOTE
seca 797
only: Explanation of the functions under the
ž Setting up the WiFi connection (seca
If the
function is active, the weight value is automatically displayed
Autohold
permanently. It is then no longer necessary to press the
NOTE
You can select which action automatically clears the displayed weight
value from the display
value
(HOLd), page 39).
1. Select the
AHOLd
menu item.
2. Confirm your selection.
ð The current setting is displayed.
seca connect 103
software.
software.
seca connect 103
seca connect 103
Height
software via WiFi. The measure-
seca connect 103
seca 103/452
797), page 32.
(ž Setting permanent display of the weight
seca
software
software
software
key) for it to be
seca connect 103
rF
menu item:
Hold
key.
Publicité
