Piece Quantity Check - Soehnle Professional 3710 Standard Série Mode D'emploi

Weight checks are performed within the tolerance, either visually through the
external traffic lights display (optional) or on the scales terminal with a beep
signal and flashing display.
For additional control settings, see Setting mode (470.702.099 User mode
3710).

3.5 Piece quantity check

The switching points for piece quantity checking are set in Setting mode.
 
 
 
Setting:
Press and hold the Print button and then press the On/Off button for 5 seconds
until  appears.
With the Tare button, raise this value to  then press the Print button to
store. Position 01 in  is displayed
With the Tare button, raise this value to position 04.
Then, press the Print button to open the input field for the Count/Neutral
Measurement reference value.
Using the Tare button and Function key, set a number value in the flashing
space.
You can use the Zero button to move by one decade from right to left.
After setting the reference value for Count / Neutral Measurement, store with
the Print button, position 05 in  is displayed.
Then, press the Print button to open the input field for the positive tolerance for
Count / Neutral Measurement.
Use the Tare, Function and Zero buttons to set a number value for the positive
tolerance for Count / Neutral Measurement, as for the Count / Neutral
Measurement reference value.
After setting the positive tolerance for Count / Neutral Measurement, store with
the Print button, position 06 in  is displayed.
Then, press the Print button to open the input field for the negative tolerance for
Count / Neutral Measurement.
www.soehnle-professional.com
Reference value for counting / neutral
measurement
Positive tolerance for counting / neutral
measurement
Negative tolerance for counting / neutral
measurement
38