Zero Setting; Turning Off - Soehnle Professional 3710 Standard Série Mode D'emploi

Zero setting

Press the Zero button to correct any minor deviations from the
zero point, which may be caused by dirt on the scales.
Verifiable and non-verifiable zero setting range: -1 to +3% of the
weighing range.

Turning off

Press the ON/OFF button to switch off the scales.
If the scales are empty and the display indicates 0 weight, the
scales can be switched off immediately.
If the scales are loaded, press and hold the ON/OFF button for 5
seconds.
The equipment switches off when the button is pressed. When the mains plug is
removed from the power socket, the equipment is disconnected from all poles of the
mains power supply. This ensures that the equipment is powered down.
Note for the version with rechargeable battery:
If the display remains at »0.0 kg«, the scales will switch off automatically after a pre-
set time. In this case, the display can be activated again by pressing the ON/OFF
button.
www.soehnle-professional.com
34