Operating The Display Unit Standard 3710 - Soehnle Professional 3710 Standard Série Mode D'emploi

2.4 Operating the display unit Standard 3710

Turning on
Remove any weights from the scales and press the ON/OFF
button.
After the test routine is completed, the calibration counter appears
briefly and then the display switches to zero.
Calibration counter: no fault messages.
The scale is now ready for use.
Weighing
Either stand or sit on the scales.
The weight is displayed on the scales.
On chair scales the arms and legs of the patient must lie on the
arm and foot rests.
Taring
Manual taring
Place some paper towels or seat covers on the scales and press
the TARA button.
The display shows zero and the letter N for net weight.
Taring is possible over the entire weight range.
Manual tare input
www.soehnle-professional.com
29