Plu Memory - Soehnle Professional 3710 Standard Série Mode D'emploi

Press the ON/Off button to return to weighing mode.
Counting with tare
Refer to Paragraph 2.5.
When a Tare weight is active, the letter "N" appears on the display.

3.3 PLU memory

The PLU (Product Look Up) memory has 100 memory locations.
The PLU memory is written through the interface.
Each PLU location contains a name, piece weight, and tare weight.
To write to the memory, the command <K080Kplu;name;piece;tare> is used.
- "plu" is the PLU location number, value from 001 to 100
- "name" consists of up to 20 characters (the first 7 characters are displayed)
- "piece" is the piece weight value in gr, with a point as decimal separator
- "tare" is the tare weight value entered in gr, with a point as decimal separator
The included product CD contains the PC software PLU memory which allows
data transfer from PC to the scale terminal.
To activate the Function key for PLU memory in Setting mode:
see the description in Paragraph 1.13 or User mode 3710 (see separate
description 470.702.099)  UCAL4 Position 02 = Value 9.
PLU application:
Activate the PLU memory by pressing the Function key - the letters PLU and the
PLU number appear on the display.
The Tare button or Function key can be used to select the desired PLU location
number.
Press the Print button to store the selected PLU location.
The name briefly appears on the display, then the PLU is activated in Count
mode with the details in the memory.
Press the ON/Off button to return to weighing mode.
www.soehnle-professional.com
36