Alibi Memory - Soehnle Professional 3710 Standard Série Mode D'emploi

On verifiable calibrated scales, the higher resolution appears for 5
seconds or flashes as long as the buttons are pressed and held –
on non-verifiable calibrated scales it appears until the Print button
and Zero button are pressed again.

Alibi memory

This symbol is currently not shown on the keypad.
The alibi memory is activated in Setting mode (see separate
description 470.702.099 User mode 3710). When the alibi memory
has been activated, an arrow points to the corresponding symbol.
The arrow flashes when the limit value entered for full level
indication is reached.
Storing in alibi memory is activated by pressing the Print button, or
by electronic data request. To do this, a print image or electronic
data set must be configured appropriately (see separate
description 470.508.077 for data interface).
The alibi memory can be queried (display/print entries) in Setting
mode:
Press and hold the Print button then press the On/Off button for 5
seconds until
with the Print button.
Use the Tare button to move to position 03 and press the Print
button to store.
The number of the last stored data set appears. Any data set can
be retrieved by changing its serial number with the arrow keys
(Tare / Function key), and then displayed by confirming with the
Print button. The selected data set is shown in a rolling display, as
follows:
Data on the display

 


 
 
www.soehnle-professional.com

Meaning
Serial number of alibi entry
Scales type
Year
Serial number
Gross or net alibi entry
kg
Tare with alibi ID
kg T
appears, then store

Serial number of
measuring station
31