Check Weighing; Percentage Weighing - Soehnle Professional 9241 Mode D'emploi

ENGLISH
above check range
within check range
below check range
14
Counting
Activate by pressing the
required reference quantity.
10, 20, 50, 100 or 200 pcs. Place reference quantity on
scale, press the
scale.
To call up the reference weight, press the
To return to weighing mode, press the
Note: The greater the reference quantity, the more preci-
se the part weight can be determined.
10 reference parts = approx. 95% counting accuracy
50 reference parts = approx. 98% counting accuracy
If the reference weight is too small (<1/5d), the scale
counts the parts but the degree of accuracy is too low.

Check weighing

Press the
kg
Increment the upper check value by pressing the
Shift decades up by pressing
sing the key.
kg
End your input and confirm by pressing
Increment the lower check value by pressing the
Shift up decades by pressing the
.
End your input and confirm by pressing
Activating the acoustic signal: see User Mode.

Percentage weighing

Allows weight display in percent based on a reference
weight.
Place reference weight on scale (> 100 x d).
Press the
The display changes to 100%.
The weight of each part placed on the scale afterwards is
displayed as a percentage of the reference weight.
To return to weighing mode, press the
key.
key, then press
key and place countable parts on
key.
key and down by pres-
key.
to define
key.
key again.
key.
.
key.
key and down by
.