Neutral Measurement - Soehnle Professional 3710 Standard Série Mode D'emploi

Use the Tare, Function and Zero buttons to set a number value for the negative
tolerance for Count / Neutral Measurement as for the Count / Neutral
Measurement reference value.
After setting the negative tolerance for Count / Neutral Measurement, store with
the Print button, position 07 in  is displayed.
Press the Zero button,  appears on the display.
To save the setting and exit, press and hold the Print button then briefly press
the Zero button. The display returns to weighing mode.
The counting check / control for neutral measurement is performed within the
tolerance, either visually through the external traffic lights display (optional) or
on the scales terminal with a beep signal and flashing display.
For additional control settings, see Setting mode (470.702.099 User mode
3710).

3.6 Neutral measurement

To program the Function key, "Neutral measurement" must be selected in Setting
mode! For Function key settings, see Paragraph 1.13 or User mode 3710 (see
separate description 470.702.099)  UCAL 4 Position 02 = Value 8.
The factor for entering the specific weight is the quantity of the measured
material relative to the calibrated unit weight (1 kg/1 g/1 lb).
Example: 1 kg paint = 0.823 litres (set UCAL1, Position 27 = 0.823)
www.soehnle-professional.com
39