Entering the conversion factor in Setting mode
Press and hold the Print button and then press the On/Off button for 5 seconds
until appears.
Press the Print button to go into .
Using the Function key, scroll back to position 26.
Use the Print button in the input field to go into the decimal places.
Set the number of decimal places with the Tare button and Function key.
Store with the Print button, the display goes to position 27.
Use the Print button to go into the input field for the neutral measurement
factor.
Using the Tare button and Function key, set a number value in the flashing
space.
You can use the Zero button to move by one decade from right to left.
After setting the "Neutral Measurement" factor, store with the Print button,
position 01 is displayed.
Press the Zero button, appears on the display.
To save the setting and exit, press and hold the Print button then briefly press
the Zero button. The display returns to weighing mode.
Neutral measurement application
Activate the "Neutral Measurement" function with the Function key.
The display shows for "Neutral Measurement", confirm with the Print
button.
The display value appears along with the factor selected in User Mode, without
a unit of weight. Stabilisation of the scales is represented on the display by a
triangle at the top left.
Press the ON/Off button to return to weighing mode.
Neutral measurement check
as described at 3.5. for piece quantity check.
www.soehnle-professional.com
40