Unauthorised Modification And Manufacture Of Spare Parts; Improper Use; Transport And Interim Storage; Shipping - Wilo CronoLine-IL 250 Série Notice De Montage Et De Mise En Service

2.7 Unauthorised modification and
manufacture of spare parts
2.8

Improper use

3

Transport and interim storage

3.1

Shipping

Transport inspection
Storage
3.2 Transport for installation/removal
purposes
Installation and operating instructions Wilo-CronoLine IL 250...
Work to the product/unit must only be carried out when at
a standstill. It is mandatory that the procedure described in the instal-
lation and operating instructions for shutting down the product/unit
be complied with.
Immediately on conclusion of the work, all safety and protective
devices must be put back in position and/or recommissioned.
Unauthorised modification and manufacture of spare parts will impair
the safety of the product/personnel and will make void the manufac-
turer's declarations regarding safety.
Modifications to the product are only permissible after consultation
with the manufacturer. Original spare parts and accessories author-
ised by the manufacturer ensure safety. The use of other parts will
absolve us of liability for consequential events.
The operating reliability of the supplied product is only guaranteed
when used properly in accordance with the section in the operating
instructions titled "Intended use". The limit values must on no
account fall under or exceed those specified in the catalogue/data
sheet.
The pump is delivered from the factory packaged in a cardboard box
or secured to a pallet and protected against dust and moisture.
On arrival, inspect the pump immediately for any transport damage.
If damage is found, the necessary procedure involving the forwarding
agent must be taken within the specified period.
Before installation, the pump must be kept dry, frost-free and pro-
tected from mechanical damage.
If available, leave the covers on the pipe connections so that no dirt
and other foreign matter can get into the pump housing.
Rotate the pump shaft once a week to prevent scoring at the bearings
and sticking.
Consult Wilo about which corrosion-proofing measures are to be car-
ried out in the event of a long storage time.
CAUTION! Risk of damage due to incorrect packaging!
If the pump is transported again at a later time, it must be packaged
so that it cannot be damaged during transport.
• Use the original packaging for this, or select equivalent packaging.
WARNING! Danger of personal injury!
Improper transport can lead to personal injury.
• Unload boxes, lathed spaces , pallets or cartons, depending on their
size and construction, with forklifts or with slings.
English
27