Télécharger Imprimer la page

Gaggia Milano CLASSIC E24 Mode D'emploi page 23

Publicité

IN CASE OF MALFUNCTION
Problem:
No brewing.
The coffee brews too fast (less
than 20 seconds).
The pump is too noisy.
Excessive loss of water from the
filter holder.
The espresso is not creamy
enough.
The coffee is too cold.
The milk does not froth enough.
The machine squirts coffee out
from the filter holder.
The machine housing and the
drain hose are hot.
Make sure that:
There is water in the tank.
The filter is not clogged because the mixture is too fine or the coffee is too pressed.
The screen is clean.
The coffee has not been ground too coarsely.
The coffee has been pressed with the tamper.
There is water in the tank.
The pump has been activated (see circuit loading).
There is enough coffee.
The filter holder has been inserted correctly (Fig.1-17).
The seal is not dirty (Fig.16).
There are no coffee residues on the edge of the filter holder.
The coffee has not been ground too coarsely.
The coffee has been pressed with the tamper.
The coffee is not too old or dry.
The traditional filter has been used with the frothing jet device (Fig.1-16).
The machine has been heated.
The coffee has not been ground too coarsely.
The coffee has been brewed in cold cups. It is recommended to always brew coffee in
warm cups.
The filter holder has not been preheated (Only for the 1st coffee).
The steam nozzle is not clogged.
The steam nozzle has not been inserted too deep in the jug.
The milk is not too hot.
The frothing jet device was installed with the "crema perfetta" filter.
The steam button is off.
• 19 •
ENGLISH

Publicité

loading

Ce manuel est également adapté pour:

Ri9481Sin035ur