Publicité
The Sync Finish mode allows you to cook different foods in each Zone
compartment which may require different time or temperature to each other and
to finish cooking at the same time as each other. For instance, you may wish to
dehydrate fruit in one drawer and cook some fries in the other. With the Sync
Finish mode, you are able to achieve this so that you can use both foods at the
same time.
To activate Sync Finish mode:
1. Press the Power button.
2. Press the Sync Finish button
3. Press the Zone 1 button.
4. Select a pre-set cooking mode (ie fish, meat etc) -even if you do not want
to use it, you will need to select one of them in order to then set your own
custom time/temperature.
5. Adjust the temperature and time using Temperature +/- buttons and Time +/-
buttons according to what you require.
6. Press the Zone 2 button
7. Select a pre-set cooking mode (ie fish, meat etc) -even if you do not want
to use it, you will need to select one of them in order to then set your own
custom time/temperature.
8. Adjust the temperature and time using Temperature +/- buttons and Time +/-
buttons according to what you require.
9. Press the Start/Pause button.
10. The Zone with the longest time will begin to heat up and cook the food inside.
When the cooking time comes to an end, it will make a beeping noise, both
Zones will stop cooking and the unit will switch itself off.
How to Use (Continued)
Sync Finish
(Zone 1 and Zone 2 Finishing at the Same Time)
15
Publicité
