Remote Control; Remote Control Assembly - WAGNER Plast Coat 830 Mode D'emploi

GB
COMMISSIONING
6.6
CONNECTING THE SPRAY LANCE (FIG. 10)
The tip size should amount to at least three times the
granular size, e.g.
granular size artificial resin plasters –> 3 mm
Tip size –> 10 mm
mortar hose.
ble of the mortar hose. (Automatic version only)
(Fig. 12) (Automatic version only)
6.7
REMOTE CONTROL (ACCESSORY/ NOT INCLUDED
IN THE SCOPE OF DELIVERY)
The remote control can be used to set the operating mode
cable tie.
6.7.1

REMOTE CONTROL ASSEMBLY

tion and that the mains plug is disconnected.
When the remote control is attached, the PC
830 can no longer be controlled via the device
operating panel.
If the connection cable is disconnected from
off.
40
material tap points forwards).
3
5
6
-
-
1
2
-
EC
NEUM REMOTE
Control
ntroler
Plast Coat 830
2 4
ELEC
PNEUM REMOTE
Control
Controler
POWER ERROR
1
1
SPEED